Rules For Design of Column in Hindi Me.

कॉलम के डिजाइन के लिए बुनियादी नियम

कॉलम के डिजाइन के लिए बुनियादी नियम नीचे सूचीबद्ध हैं:

How To Design Columns "Civil Engineering Hindi" By "The Vipin Chauhan"

A. FOR LONGITUDINAL STEEL:

1. The cross-sectional area of longitudinal steel in a column shall not be less than 0.8 and not more than 6% of the cross-sectional area of the column.

Now Read Our Blog in English Click Here

In places where bars from a column below have to be lapped with those in the column to be designed, the maximum percentage of steel should not exceed 4%.

2. The diameter of longitudinal bars should not be less than 12 mm and should not be more than 50 mm.

3. Round columns and columns having helical binders should have at least bars.

4. The minimum cover of concrete to the outside of longitudinal bars shall be 4 cm or the diameter of the bar whichever is greater. In case where the maximum dimension of a column does not exceed 20 cm and the diameter of the longitudinal bars does not exceed 12 mm, the cover of 2.5 cm may be used.

5. Where it is necessary to splice the longitudinal bars, the bars shall overlap for a distance of not less than 24 times the diameter of the smallest bar.

6. The spacing of bars measured along the periphery of the column shall not exceed 300 mm.

B. FOR TRANSVERSE REINFORCEMENT:

Transverse steel may be provided either in the form of lateral ties or helical bars (spiral).

1. The minimum diameter of the ties or helical reinforcement shall not less than 1/4th the diameter of the largest longitudinal bars and in no case less than 5 mm.

2. The maximum diameter of the ties or helical steel should preferably be not more than 12 mm and 25 mm respectively.

3. The pitch of the ties should not be more than the least of the following

a) Least lateral dimension of the column.

b) 16 times the diameter of the smallest longitudinal bar nearest to the compression face of the member.

c) 48 times the diameter of the tie.

4. Pitch of the helical reinforcement should not be more than least of the following:a) 1/6th the diameter of the concrete core.
b) 75mm.

5. The least spacing of the lateral ties may be 150 mm and for spirals, the minimum pitch shall be 25 mm or three times the diameter of the helical bars whichever is greater.

यह भी पढ़े How To Calculate Size and Capacity of Rectangular Water Tank

1 comment:

Modicare Local ServiceAugust 11, 2018 at 5:31 PM
How to know good quality cement

If the cement is cooled down on the cement pile, then the cement is of good quality.
If the bales are visible in the opening of the cement sack, then understand that the cement is not of good quality.
With cement in both hands, if the cement slips on the wrist, then its quality is good.
The quality of good cement is that when it is put into the water, it does not sink but floats above the water.
for more info visit here: https://fullinformation.yolasite.com/How-to-know-good-quality-cement.php

Rules For Design of Column in Hindi Me.